[Silly Little Cars] 2007 Go-4 Governor

Thu Apr 14 05:07:21 PDT 2016

I don't want to screw up the EMC, so let me get is straight. On your first suggestion:

"Pink and White tied together allows the governor to be disconnected entirely, and restores the engine to stock as would be in an Atoz car..."

So, this is leaving the governor box plugged in, cutting the pink and white wires, tie them together (on the wire harness/connector side) and cap the pink and white wire on the governor side. 

Correct?

Peter DAddeo
(860) 778-5656

> On Apr 14, 2016, at 2:06 AM, Steven J. Moss via Silly_little_cars <silly_little_cars at lists.sillylittlecars.com> wrote:
> 
> Red goes to light, pink is injector power, white to injector 2 and 3, yellow is Speed Pulse, Orange is ECM power, and Black is ground.  Pink and White tied together allows the governor to be disconnected entirely, and restores the engine to stock as would be in an Atoz car as was explained to me.  
>  
> Capping off the black wire will also disable the governor function and is what most people do, however I have heard reports that it can eventually screw up the ECM.   
>  
> The governor on mine only has 5 wires (no orange ECM wire)… I have successfully disconnected just the yellow speed pulse to it and taken it for a test run and seems to work just the same as disconnecting the black ground…
>  
> Unplugging the governor entirely and splicing the Injector Power to the Injector 2&3 (pink and white) also works as stated above, and seems to produce more power (but also seems to slow down much quicker when the gas is let off).
>  
>  
> From: Silly_little_cars [mailto:silly_little_cars-bounces at lists.sillylittlecars.com] On Behalf Of Keith Charsha via Silly_little_cars
> Sent: Wednesday, April 13, 2016 8:33 PM
> To: J W <jew1958 at gmail.com>; Silly Little Email List <silly_little_cars at lists.sillylittlecars.com>
> Subject: Re: [Silly Little Cars] 2007 Go-4 Governor
>  
> On 4/13/2016 4:16 PM, J W via Silly_little_cars wrote:
> I see 6 wires.  What's the yellow one to and do you disconnect it also?
> Bingo we have a winner
> 
> On Apr 13, 2016 6:14 PM, "Peter Daddeo via Silly_little_cars" <silly_little_cars at lists.sillylittlecars.com> wrote:
> <image001.jpg>
> 
> Is this the governor?
> 
> Peter DAddeo
> (860) 778-5656
> 
> On Apr 13, 2016, at 9:32 AM, Keith Charsha via Silly_little_cars <silly_little_cars at lists.sillylittlecars.com> wrote:
> 
> On 4/12/2016 7:43 PM, Steven J. Moss via Silly_little_cars wrote:
> Outside the electrical accessory box (where the governor resides) there is a connector with a purple and a white wire (coming from the injectors) and the other side of the connector goes into the electrical accessory box and feeds the governor. I simply unplugged the connector and hot wired the purple and white wires together.
>  
>  
>  
> From: Peter Daddeo [mailto:petethesoundguy at gmail.com] 
> Sent: Tuesday, April 12, 2016 7:27 PM
> To: Steven J. Moss <sj.moss at comcast.net>; Silly Little Email List <silly_little_cars at lists.sillylittlecars.com>
> Subject: Re: [Silly Little Cars] 2007 Go-4 Governor
>  
> I have to do the same, so curious...
> Can you describe further the wire splicing with the purple and white wire?  
> 
> Peter DAddeo
> (860) 778-5656
> 
> On Apr 12, 2016, at 10:13 PM, Steven J. Moss via Silly_little_cars <silly_little_cars at lists.sillylittlecars.com> wrote:
> 
> Hello, I have a 2007 Go-4.  Looking for input on options to disconnect the governor and the best way
>  
> The governor has 5 wires to it,
> Injectors 2&3  (white)
> Injector Power (purple)
> Ground (black)
> Warning Light (red)
> Speed Pulse (yellow)
>  
> I had disconnected the governor by caping and stowing the black ground wire and it seemed to work well enough and I was able to achieve desired speed, this is the only method I have found recommended on internet sources including this one.
>  
> I have also tried it by disconnecting the Speed Pulse as well with the same acceptable results as disconnecting the ground.
>  
> A friend showed me a third way a couple days ago, and that was by splicing the Injector Power to the Injector 2&3 (purple and white) wires together.   This seems to work really well as well, in fact there seems to be more power on the lower end accompanied by a deep throated vroom.
>  
> Looking for advice, input, warnings on the various methods, as well as other methods.
>  
> _______________________________________________
> Silly Little Cars Email List
> sillylittlecars at sillylittlecars.com
> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
> To unsubscribe, click that link above.
> 
> 
> 
> _______________________________________________
> Silly Little Cars Email List
> sillylittlecars at sillylittlecars.com
> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
> To unsubscribe, click that link above.
>  
>  
> So, you're saying you basically disconnected all wires going to and from the governor and crossed the purple and white wire together so they seem to be at a dead end?
> _______________________________________________
> Silly Little Cars Email List
> sillylittlecars at sillylittlecars.com
> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
> To unsubscribe, click that link above.
> 
> 
> 
> _______________________________________________
> Silly Little Cars Email List
> sillylittlecars at sillylittlecars.com
> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
> To unsubscribe, click that link above.
> 
> 
> 
> 
> 
> 
> _______________________________________________
> Silly Little Cars Email List
> sillylittlecars at sillylittlecars.com
> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
> To unsubscribe, click that link above.
>  
>  
>  
> _______________________________________________
> Silly Little Cars Email List
> sillylittlecars at sillylittlecars.com
> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
> To unsubscribe, click that link above.
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sillylittlecars.com/pipermail/silly_little_cars-sillylittlecars.com/attachments/20160414/0760d4c6/attachment.htm>