[Silly Little Cars] 2007 Go-4 Governor

Wed Apr 13 23:06:52 PDT 2016

Red goes to light, pink is injector power, white to injector 2 and 3, yellow
is Speed Pulse, Orange is ECM power, and Black is ground.  Pink and White
tied together allows the governor to be disconnected entirely, and restores
the engine to stock as would be in an Atoz car as was explained to me.   

Capping off the black wire will also disable the governor function and is
what most people do, however I have heard reports that it can eventually
screw up the ECM.   

The governor on mine only has 5 wires (no orange ECM wire). I have
successfully disconnected just the yellow speed pulse to it and taken it for
a test run and seems to work just the same as disconnecting the black
ground.

Unplugging the governor entirely and splicing the Injector Power to the
Injector 2&3 (pink and white) also works as stated above, and seems to
produce more power (but also seems to slow down much quicker when the gas is
let off).

From: Silly_little_cars
[mailto:silly_little_cars-bounces at lists.sillylittlecars.com] On Behalf Of
Keith Charsha via Silly_little_cars
Sent: Wednesday, April 13, 2016 8:33 PM
To: J W <jew1958 at gmail.com>; Silly Little Email List
<silly_little_cars at lists.sillylittlecars.com>
Subject: Re: [Silly Little Cars] 2007 Go-4 Governor

On 4/13/2016 4:16 PM, J W via Silly_little_cars wrote:
I see 6 wires.  What's the yellow one to and do you disconnect it also?

Bingo we have a winner

On Apr 13, 2016 6:14 PM, "Peter Daddeo via Silly_little_cars"
<silly_little_cars at lists.sillylittlecars.com
<mailto:silly_little_cars at lists.sillylittlecars.com> > wrote:

Is this the governor?

Peter DAddeo 

(860) 778-5656 <tel:%28860%29%20778-5656> 

On Apr 13, 2016, at 9:32 AM, Keith Charsha via Silly_little_cars
<silly_little_cars at lists.sillylittlecars.com
<mailto:silly_little_cars at lists.sillylittlecars.com> > wrote:

On 4/12/2016 7:43 PM, Steven J. Moss via Silly_little_cars wrote:

Outside the electrical accessory box (where the governor resides) there is a
connector with a purple and a white wire (coming from the injectors) and the
other side of the connector goes into the electrical accessory box and feeds
the governor. I simply unplugged the connector and hot wired the purple and
white wires together.

From: Peter Daddeo [mailto:petethesoundguy at gmail.com] 
Sent: Tuesday, April 12, 2016 7:27 PM
To: Steven J. Moss  <mailto:sj.moss at comcast.net> <sj.moss at comcast.net>;
Silly Little Email List
<mailto:silly_little_cars at lists.sillylittlecars.com>
<silly_little_cars at lists.sillylittlecars.com>
Subject: Re: [Silly Little Cars] 2007 Go-4 Governor

I have to do the same, so curious...

Can you describe further the wire splicing with the purple and white wire?  

Peter DAddeo

(860) 778-5656 <tel:%28860%29%20778-5656> 

On Apr 12, 2016, at 10:13 PM, Steven J. Moss via Silly_little_cars
<silly_little_cars at lists.sillylittlecars.com
<mailto:silly_little_cars at lists.sillylittlecars.com> > wrote:

Hello, I have a 2007 Go-4.  Looking for input on options to disconnect the
governor and the best way

The governor has 5 wires to it, 

Injectors 2&3  (white)

Injector Power (purple)

Ground (black)

Warning Light (red)

Speed Pulse (yellow)

I had disconnected the governor by caping and stowing the black ground wire
and it seemed to work well enough and I was able to achieve desired speed,
this is the only method I have found recommended on internet sources
including this one.

I have also tried it by disconnecting the Speed Pulse as well with the same
acceptable results as disconnecting the ground.

A friend showed me a third way a couple days ago, and that was by splicing
the Injector Power to the Injector 2&3 (purple and white) wires together.
This seems to work really well as well, in fact there seems to be more power
on the lower end accompanied by a deep throated vroom.

Looking for advice, input, warnings on the various methods, as well as other
methods.

_______________________________________________
Silly Little Cars Email List
sillylittlecars at sillylittlecars.com
<mailto:sillylittlecars at sillylittlecars.com> 
http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlec
ars.com
To unsubscribe, click that link above.

So, you're saying you basically disconnected all wires going to and from the
governor and crossed the purple and white wire together so they seem to be
at a dead end?

_______________________________________________
Silly Little Cars Email List
sillylittlecars at sillylittlecars.com
<mailto:sillylittlecars at sillylittlecars.com> 
http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlec
ars.com
To unsubscribe, click that link above.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sillylittlecars.com/pipermail/silly_little_cars-sillylittlecars.com/attachments/20160413/c0e2e283/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 109605 bytes
Desc: not available
URL: <http://lists.sillylittlecars.com/pipermail/silly_little_cars-sillylittlecars.com/attachments/20160413/c0e2e283/attachment-0001.jpeg>