[Silly Little Cars] 2007 Go-4 Governor

Wed Apr 13 21:24:36 PDT 2016

Snipped the black one only.  Did the trick!!

Peter DAddeo
(860) 778-5656

> On Apr 13, 2016, at 11:33 PM, Keith Charsha via Silly_little_cars <silly_little_cars at lists.sillylittlecars.com> wrote:
> 
> On 4/13/2016 4:16 PM, J W via Silly_little_cars wrote:
> I see 6 wires.  What's the yellow one to and do you disconnect it also?
>> Bingo we have a winner
>> 
>>> On Apr 13, 2016 6:14 PM, "Peter Daddeo via Silly_little_cars" <silly_little_cars at lists.sillylittlecars.com> wrote:
>>> <mime-attachment.jpg>
>>> 
>>> Is this the governor?
>>> 
>>> Peter DAddeo
>>> (860) 778-5656
>>> 
>>> On Apr 13, 2016, at 9:32 AM, Keith Charsha via Silly_little_cars <silly_little_cars at lists.sillylittlecars.com> wrote:
>>> 
>>>>> On 4/12/2016 7:43 PM, Steven J. Moss via Silly_little_cars wrote:
>>>>> Outside the electrical accessory box (where the governor resides) there is a connector with a purple and a white wire (coming from the injectors) and the other side of the connector goes into the electrical accessory box and feeds the governor. I simply unplugged the connector and hot wired the purple and white wires together.
>>>>> 
>>>>>  
>>>>> 
>>>>>  
>>>>> 
>>>>>  
>>>>> 
>>>>> From: Peter Daddeo [mailto:petethesoundguy at gmail.com] 
>>>>> Sent: Tuesday, April 12, 2016 7:27 PM
>>>>> To: Steven J. Moss <sj.moss at comcast.net>; Silly Little Email List <silly_little_cars at lists.sillylittlecars.com>
>>>>> Subject: Re: [Silly Little Cars] 2007 Go-4 Governor
>>>>> 
>>>>>  
>>>>> 
>>>>> I have to do the same, so curious...
>>>>> 
>>>>> Can you describe further the wire splicing with the purple and white wire?  
>>>>> 
>>>>> Peter DAddeo
>>>>> 
>>>>> (860) 778-5656
>>>>> 
>>>>> 
>>>>> On Apr 12, 2016, at 10:13 PM, Steven J. Moss via Silly_little_cars <silly_little_cars at lists.sillylittlecars.com> wrote:
>>>>> 
>>>>> Hello, I have a 2007 Go-4.  Looking for input on options to disconnect the governor and the best way
>>>>> 
>>>>>  
>>>>> 
>>>>> The governor has 5 wires to it,
>>>>> 
>>>>> Injectors 2&3  (white)
>>>>> 
>>>>> Injector Power (purple)
>>>>> 
>>>>> Ground (black)
>>>>> 
>>>>> Warning Light (red)
>>>>> 
>>>>> Speed Pulse (yellow)
>>>>> 
>>>>>  
>>>>> 
>>>>> I had disconnected the governor by caping and stowing the black ground wire and it seemed to work well enough and I was able to achieve desired speed, this is the only method I have found recommended on internet sources including this one.
>>>>> 
>>>>>  
>>>>> 
>>>>> I have also tried it by disconnecting the Speed Pulse as well with the same acceptable results as disconnecting the ground.
>>>>> 
>>>>>  
>>>>> 
>>>>> A friend showed me a third way a couple days ago, and that was by splicing the Injector Power to the Injector 2&3 (purple and white) wires together.   This seems to work really well as well, in fact there seems to be more power on the lower end accompanied by a deep throated vroom.
>>>>> 
>>>>>  
>>>>> 
>>>>> Looking for advice, input, warnings on the various methods, as well as other methods.
>>>>> 
>>>>>  
>>>>> 
>>>>> _______________________________________________
>>>>> Silly Little Cars Email List
>>>>> sillylittlecars at sillylittlecars.com
>>>>> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
>>>>> To unsubscribe, click that link above.
>>>>> 
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> Silly Little Cars Email List
>>>>> sillylittlecars at sillylittlecars.com
>>>>> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
>>>>> To unsubscribe, click that link above.
>>>>> 
>>>>> 
>>>> So, you're saying you basically disconnected all wires going to and from the governor and crossed the purple and white wire together so they seem to be at a dead end?
>>>> _______________________________________________
>>>> Silly Little Cars Email List
>>>> sillylittlecars at sillylittlecars.com
>>>> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
>>>> To unsubscribe, click that link above.
>>>> 
>>>> 
>>> 
>>> _______________________________________________
>>> Silly Little Cars Email List
>>> sillylittlecars at sillylittlecars.com
>>> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
>>> To unsubscribe, click that link above.
>>> 
>>> 
>>> 
>> 
>> 
>> _______________________________________________
>> Silly Little Cars Email List
>> sillylittlecars at sillylittlecars.com
>> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
>> To unsubscribe, click that link above.
>> 
>> 
> 
> _______________________________________________
> Silly Little Cars Email List
> sillylittlecars at sillylittlecars.com
> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
> To unsubscribe, click that link above.
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sillylittlecars.com/pipermail/silly_little_cars-sillylittlecars.com/attachments/20160414/0a2f3ae9/attachment.htm>