[Silly Little Cars] 2007 Go-4 Governor

[Peter Daddeo via Silly_little_cars]

Is this the governor?

Peter DAddeo
(860) 778-5656

> On Apr 13, 2016, at 9:32 AM, Keith Charsha via Silly_little_cars <silly_little_cars at lists.sillylittlecars.com> wrote:
> 
>> On 4/12/2016 7:43 PM, Steven J. Moss via Silly_little_cars wrote:
>> Outside the electrical accessory box (where the governor resides) there is a connector with a purple and a white wire (coming from the injectors) and the other side of the connector goes into the electrical accessory box and feeds the governor. I simply unplugged the connector and hot wired the purple and white wires together.
>>  
>>  
>>  
>> From: Peter Daddeo [mailto:petethesoundguy at gmail.com] 
>> Sent: Tuesday, April 12, 2016 7:27 PM
>> To: Steven J. Moss <sj.moss at comcast.net>; Silly Little Email List <silly_little_cars at lists.sillylittlecars.com>
>> Subject: Re: [Silly Little Cars] 2007 Go-4                 Governor
>>  
>> I have to do the same, so curious...
>> Can you describe further the wire splicing with the purple and white wire?  
>> 
>> Peter DAddeo
>> (860) 778-5656
>> 
>> On Apr 12, 2016, at 10:13 PM, Steven J. Moss via Silly_little_cars <silly_little_cars at lists.sillylittlecars.com> wrote:
>> 
>> Hello, I have a 2007 Go-4.  Looking for input on options to disconnect the governor and the best way
>>  
>> The governor has 5 wires to it,
>> Injectors 2&3  (white)
>> Injector Power (purple)
>> Ground (black)
>> Warning Light (red)
>> Speed Pulse (yellow)
>>  
>> I had disconnected the governor by caping and stowing the black ground wire and it seemed to work well enough and I was able to achieve desired speed, this is the only method I have found recommended on internet sources                 including this one.
>>  
>> I have also tried it by disconnecting the Speed Pulse as well with the same acceptable results as disconnecting the ground.
>>  
>> A friend showed me a third way a couple days ago, and that was by splicing the Injector Power to the Injector 2&3 (purple and white) wires together.   This seems to work really well as well, in fact there seems to be more power on the lower end accompanied by a deep throated vroom.
>>  
>> Looking for advice, input, warnings on the various methods, as well as other methods.
>>  
>> _______________________________________________
>> Silly Little Cars Email List
>> sillylittlecars at sillylittlecars.com
>> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
>> To unsubscribe, click that link above.
>> 
>> 
>> 
>> 
>> _______________________________________________
>> Silly Little Cars Email List
>> sillylittlecars at sillylittlecars.com
>> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
>> To unsubscribe, click that link above.
>> 
>> 
> So, you're saying you basically disconnected all wires going to and from the governor and crossed the purple and white wire together so they seem to be at a dead end?
> _______________________________________________
> Silly Little Cars Email List
> sillylittlecars at sillylittlecars.com
> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
> To unsubscribe, click that link above.
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sillylittlecars.com/pipermail/silly_little_cars-sillylittlecars.com/attachments/20160413/8a554cd7/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.JPG
Type: image/jpeg
Size: 109605 bytes
Desc: not available
URL: <http://lists.sillylittlecars.com/pipermail/silly_little_cars-sillylittlecars.com/attachments/20160413/8a554cd7/attachment-0001.jpeg>