[Silly Little Cars] 2007 Go-4 Governor

[Keith Charsha via Silly_little_cars]

On 4/12/2016 7:13 PM, Steven J. Moss via Silly_little_cars wrote:
>
> Hello, I have a 2007 Go-4.  Looking for input on options to disconnect 
> the governor and the best way
>
> The governor has 5 wires to it,
>
> Injectors 2&3  (white)
>
> Injector Power (purple)
>
> Ground (black)
>
> Warning Light (red)
>
> Speed Pulse (yellow)
>
> I had disconnected the governor by caping and stowing the black ground 
> wire and it seemed to work well enough and I was able to achieve 
> desired speed, this is the only method I have found recommended on 
> internet sources including this one.
>
> I have also tried it by disconnecting the Speed Pulse as well with the 
> same acceptable results as disconnecting the ground.
>
> A friend showed me a third way a couple days ago, and that was by 
> splicing the Injector Power to the Injector 2&3 (purple and white) 
> wires together.   This seems to work really well as well, in fact 
> there seems to be more power on the lower end accompanied by a deep 
> throated vroom.
>
> Looking for advice, input, warnings on the various methods, as well as 
> other methods.
>
>
>
> _______________________________________________
> Silly Little Cars Email List
> sillylittlecars at sillylittlecars.com
> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
> To unsubscribe, click that link above.
>
>
I have a 2003 Go 4.  Not sure if it is the same set up.  I Simply cut 
the black wire going to the governor box and capped the wires. It 
increased my top speed from 40 mph to 60 mph.  Are any of you guys 
getting even more speed out of it by doing it differently?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sillylittlecars.com/pipermail/silly_little_cars-sillylittlecars.com/attachments/20160413/f7592ac0/attachment.htm>