[Silly Little Cars] 2007 Go-4 Governor

[Peter Daddeo via Silly_little_cars]

I have to do the same, so curious...
Can you describe further the wire splicing with the purple and white wire?  

Peter DAddeo
(860) 778-5656

> On Apr 12, 2016, at 10:13 PM, Steven J. Moss via Silly_little_cars <silly_little_cars at lists.sillylittlecars.com> wrote:
> 
> Hello, I have a 2007 Go-4.  Looking for input on options to disconnect the governor and the best way
>  
> The governor has 5 wires to it,
> Injectors 2&3  (white)
> Injector Power (purple)
> Ground (black)
> Warning Light (red)
> Speed Pulse (yellow)
>  
> I had disconnected the governor by caping and stowing the black ground wire and it seemed to work well enough and I was able to achieve desired speed, this is the only method I have found recommended on internet sources including this one.
>  
> I have also tried it by disconnecting the Speed Pulse as well with the same acceptable results as disconnecting the ground.
>  
> A friend showed me a third way a couple days ago, and that was by splicing the Injector Power to the Injector 2&3 (purple and white) wires together.   This seems to work really well as well, in fact there seems to be more power on the lower end accompanied by a deep throated vroom.
>  
> Looking for advice, input, warnings on the various methods, as well as other methods.
>  
> _______________________________________________
> Silly Little Cars Email List
> sillylittlecars at sillylittlecars.com
> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
> To unsubscribe, click that link above.
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sillylittlecars.com/pipermail/silly_little_cars-sillylittlecars.com/attachments/20160412/ff69b8cf/attachment.htm>