[Silly Little Cars] Silly_little_cars Digest, Vol 60, Issue 11

[brickwood at ccountry.net]

> Have you tried taking that bad knucle/spindle/bearing mount assembly to
> your local machine shop? I'd have the bad bearing pressed out, then look
> for part numbers somewhere on the bad bearing. Go-4 dealers parts prices
> are marked up terribly. Good
> luck._______________________________________________
> Silly Little Cars Email List
> sillylittlecars at sillylittlecars.com
> http://lists.sillylittlecars.com/listinfo.cgi/silly_little_cars-sillylittlecars.com
> Use the wiki at http://sillylittlecars.com
>
> thank you, the bearing mount piece is alot more , not sure though, might
be worth a try to a maching shop, my dad says it will be spendy, who was
a machinist. its hard to save when they mark up parts like that.  i will
let everyone know what happens. in the end. just the bearings cost 30.00
but he make a mistake of trying to get the bearings out of the bearing
mount and in the proc ess mangled the bearing mount, or knuckle.   phil
>